RUT955

INDUSTRIAL CELLULAR ROUTER

RUT955 offers a dual-SIM cellular connection, four Ethernet ports, and Wi-Fi combined with RS232, RS485, USB interfaces, and inputs/outputs for an incredible variety of professional application scenarios. This router comes with RutOS advanced software features such as Modbus, SNMP, TR-069, NTRIP, MQTT protocol support, and GNSS tracking capabilities.

End of ordering: 2023 July 30
End of production: 2023 December 30
End of support: 2028 July 30

CONNECTIVITY
4G LTE (Cat 4), 3G, 2G

DUAL SIM
With auto failover, backup WAN and other switching scenarios

MULTIPLE INTERFACES
Ethernet, Serial (RS232, RS485) and multiple Inputs/Outputs

GNSS
Global Navigation Satellite System for location services and time synchronization

FEATURES

Mobile

•     Mobile module     4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
•     SIM switch    2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
•     Status    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
•     SMS    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
•     USSD    Supports sending and reading Unstructured Supplementary Service Data messages
•     Black/White list    Operator black/white list
•     Multiple PDN    Possibility to use different PDNs for multiple network access and services
•     Band management    Band lock, Used band status display
•     APN    Auto APN
•     Bridge    Direct connection (bridge) between mobile ISP and device on LAN
•     Passthrough    Router assigns its mobile WAN IP address to another device on LAN

Wireless

•     Wireless mode    IEEE 802.11b/g/n, Access Point (AP), Station (STA)
•     WiFi security    WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
•     SSID/ESSID    SSID stealth mode and access control based on MAC address
•     WiFi users    Up to 100 simultaneous connections
•     Wireless Hotspot    Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

Ethernet

•     WAN    1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
•     LAN    3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

•     Routing    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
•     Network protocols    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
•     VoIP passthrough support    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
•     Connection monitoring    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
•     Firewall    Port forward, traffic rules, custom rules
•     DHCP    Static and dynamic IP allocation, DHCP Relay, Relayd
•     QoS / Smart Queue Management (SQM)    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
•     DDNS    Supported >25 service providers, others can be configured manually
•     Network backup    WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
•     Load balancing    Balance Internet traffic over multiple WAN connections
•     Hotspot    Internal/external Radius server, captive portal, built in customizable landing page
•     SSHFS    Possibility to mount remote file system via SSH protocol

Security

•     Authentication    Pre-shared key, digital certificates, X.509 certificates
•     Firewall    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
•     Attack prevention    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
•     VLAN    Port and tag based VLAN separation
•     Mobile quota control    Custom data limits for both SIM cards
•     WEB filter    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
•     Access control    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

•     OpenVPN    Multiple clients and a server can run simultaneously, 12 encryption methods
•     OpenVPN Encryption    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
•     IPsec    IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
•     GRE    GRE tunnel
•     PPTP, L2TP    Client/Server instances can run simultaneously, L2TPv3 support
•     Stunnel    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
•     DMVPN    Method of building scalable IPsec VPNs
•     SSTP    SSTP client instance support
•     ZeroTier    ZeroTier VPN client support
•     WireGuard    WireGuard VPN client and server support

MODBUS TCP SLAVE

•     ID range    Respond to one ID in range [1;255] or any
•     Allow Remote Access    Allow access through WAN
•     Custom registers    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

•     Supported functions    01, 02, 03, 04, 05, 06, 15, 16
•     Supported data formats    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS RTU MASTER (RS232)

•     Supported baud rates    From 300 to 115200
•     Supported functions    01, 02, 03, 04, 05, 06, 15, 16
•     Supported data formats    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
•     Number of data bits    From 5 to 8
•     Number of stop bits    1 or 2
•     Parity    None, Even, Odd
•     Flow    None, RTS/CTS, Xon/Xoff
•     Duplex    Full duplex

MODBUS RTU MASTER (RS485)

•     Supported baud rates    From 300 to 115200
•     Supported functions    01, 02, 03, 04, 05, 06, 15, 16
•     Supported data formats    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
•     Number of data bits    8
•     Number of stop bits    1
•     Parity    None, Even, Odd
•     Flow    None, Xon/Xoff
•     Duplex    Half duplex

MODBUS DATA TO SERVER

•     Protocol    HTTP(S), MQTT, Azure MQTT

MQTT Gateway

•     MQTT Gateway    Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

•     Supported modes    TCP Master, DNP3 Outstation, RTU Master

Monitoring & Management

•     WEB UI    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
•     FOTA    Firmware update from server, automatic notification
•     SSH    SSH (v1, v2)
•     SMS    SMS status, SMS configuration, send/read SMS via HTTP POST/GET
•     Call    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
•     TR-069    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
•     MQTT    MQTT Broker, MQTT publisher
•     SNMP    SNMP (v1, v2, v3), SNMP Trap
•     JSON-RPC    Management API over HTTP/HTTPS
•     MODBUS    MODBUS TCP status/control
•     RMS    Teltonika Remote Management System (RMS)

IoT Platforms

•     Cloud of Things    Allows monitoring of: Device data, Mobile data, Network info, Availability
•     ThingWorx    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
•     Cumulocity    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
•     Azure IoT Hub    Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state,
•     GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

System Characteristics

•     CPU    Atheros Wasp, MIPS 74Kc, 550 MHz
•     RAM    128 MB, DDR2
•     FLASH storage    16 MB, SPI Flash

Firmware / Configuration

•     WEB UI    Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
•     FOTA    Update FW/configuration from server
•     RMS    Update FW/configuration for multiple devices at once
•     Keep settings    Update FW without losing current configuration

Firmware Customization

•     Operating system    RutOS (OpenWrt based Linux OS)
•     Supported languages    Busybox shell, Lua, C, C++
•     Development tools    SDK package with build environment provided

Location Tracking

•     GNSS    GPS, GLONASS, BeiDou, Galileo and QZSS
•     Coordinates    GNSS coordinates via WebUI, SMS, TAVL, RMS
•     NMEA    NMEA 0183
•     NTRIP    NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
•     Server software    Supported server software TAVL, RMS
•     Geofencing    Configurable multiple geofence zones

Serial

•     RS232    DB9 connector, full RS232 (with RTS, CTS)
•     RS485    RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
•     Serial functions    Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client

USB

•     Data rate    USB 2.0
•     Applications    Samba share, USB-to-serial
•     External devices    Possibility to connect external HDD, flash drive, additional modem, printer
•     Storage formats    FAT, FAT32, NTFS

Input / Output

•     Input    1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4 pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
•     Output    1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
•     Events    Email, RMS, SMS
•     I/O juggler    Allows to set certain I/O conditions to initiate event

Power

•     Connector    4-pin industrial DC power socket
•     Input voltage range    9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
•     PoE (passive)    Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
•     Power consumption    < 2 W idle, < 7 W Max

Physical Interfaces (Ports, LEDs, Buttons, SIM)

•     Ethernet    4 x RJ45 ports, 10/100 Mbps
•     I/O’s    3 x Digital Inputs, 1 x Analog input, 2 x Relays on 16 pin connector, 2 x I/O pins on 4 pin power connector
•     Status LEDs    1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
•     SIM    2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
•     Power    1 x 4 pin power connector
•     Input/output    1x 10 pin industrial socket for inputs/outputs
•     Antennas    2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
•     USB    1 x USB A port for external devices, 1 x USB A port for external devices
•     RS232    1 x DB9 socket
•     RS485    1 x 6 pin industrial socket
•     Reset    Reboot/User default reset/Factory reset button

Physical Specification

•     Casing material    Aluminium housing, plastic panels
•     Dimensions (W x H x D)    110 x 50 x 100 mm
•     Weight    287 g
•     Mounting options    DIN rail (can be mounted on two sides), flat surface placement

Operating Environment

•     Operating temperature    -40 °C to 75 °C
•     Operating humidity    10% to 90% non-condensing
•     Ingress Protection Rating    IP30

Regulatory & Type Approvals

•     Regulatory    CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance CE/RED, FCC, IC, PTCRB, RCM, EAC, RoHS, WEEE, IP rating, Anatel, GCF, REACH, E-mark, DNV GL, ECE Regulation 118, Morocco ANRT, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL), WiFi Certified, MODBUS Conformance
•     Operator    AT&T, Verizon
•     Vehicle    ECE R10 (E-mark) ECE R118"

EMI Immunity

•     Standards    Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0
      FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)
•     ESD    EN 61000-4-2:2009
•     RS    EN 61000-4-3:2006 + A1:2008 + A2:2010
•     EFT    EN 61000-4-4:2012
•     Surge immunity (AC Power Line)    EN 61000-4-5:2006
•     Surge immunity (Ethernet ports)    EN 61000-4-5:2014, clause 7.1 of ITU-T K21
•     Transient and surges    ISO 7637-2:2004
•     CS    EN 61000-4-6:2009
•     DIP    EN 61000-4-11:2004

RF

•     Standards    EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908 13 V11.1.1, EN 303 413 V1.1.0
      AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017
      FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
      RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1

Safety

•     Standards    IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
                           AS/NZS 60950.1:2015
                           EN 50665:2017, EN 62311:2008
                           FCC 47 CFR Part 1 1.1310
                           RSS-102 Issue 5 (2015)

Environmental

•     Ingress Protect    LST EN 60529:1999+A1+AC:2002, LST EN 60529:1999+A1+AC:2002
•     Vibration    Class guideline-DNVGL-CG-0339:2016 EN 60068-2-6:2008, Class guideline-DNVGL-CG-0339:2016
•     EN 60068-2-6:2008
  
  

Package contains

    Router RUT955
    9 W PSU
    2 x LTE antennas (magnetic mount, SMA male, 3 m cable)
    2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
    GNSS antenna (adhesive , SMA male, 3 m cable)
    RS485 connector block
    I/O connector block
    Ethernet cable (1.5 m)
    SIM Adapter kit
    QSG (Quick Start Guide)
    Packaging box

Standard order codes
Product code     HS Code     HTS Code     Package contains

RUT955 T033B0 851762 8517.62.00 Standard package with Euro PSU
RUT955 0033B0 851762 8517.62.00 Standard package with Euro PSU
RUT955 J034S0 851762 8517.62.00  Standard package with US PSU
RUT955 W03660 851762 8517.62.00 Standard package with US PSU

For more information on all available packaging options – please contact us directly.
Available versions
Product code     Region     Frequency

RUT955 0*****
Europe1, the Middle East, Africa
    4G (LTE-FDD): B1, B3, B5, B7, B8, B20
    4G (LTE-TDD): B40
    3G: B1, B5, B8
    2G: B3, B8

RUT955 T*****
Europe1, the Middle East, Africa, Thailand, India
    4G (LTE-FDD): B1, B3, B7, B8, B20, B28A
    4G (LTE-TDD): B38, B40, B41
    3G: B1, B8
    2G: B3, B8

RUT955 H*****
Europe1, the Middle East, Africa, Thailand, India
    4G (LTE-FDD): B1, B3, B5, B7, B8, B20
    4G (LTE-TDD): B38, B40, B41
    3G: B1, B5, B8
    2G: B3, B8

RUT955 J*****
North America (AT&T, Bell, T-Mobile)
    4G (LTE-FDD): B2, B4, B12
    3G: B2, B4, B5

RUT955 W*****
North America (AT&T/ Verizon/ T-mobile)
    4G (LTE-FDD): B2/B4/B5/B12/B13/B14/B66/B71
    3G: B2/B4/B5

RUT955 M*****
South America, Australia, New Zealand, Taiwan
    4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B28
    4G (LTE-TDD): B40
    3G: B1, B2, B5, B8
    2G: B2, B3, B5, B8

RUT955 P*****
Japan
    4G (LTE-FDD): B1, B3, B8, B18, B19, B26
    4G (LTE-TDD): B41
    3G: B1, B6, B8, B19

RUT955 V*****
Global1
    4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28
    4G (LTE-TDD): B38, B39, B40, B41
    3G: B1, B2, B4, B5, B6, B8, B19
    2G: B2, B3, B5, B8

RUT955 Z*****
Europe1, the Middle East, Africa, Thailand
    4G (LTE-FDD): B1, B3, B7, B8, B20, B28A
    4G (LTE-TDD): B38, B40, B41
    3G: B1, B8
    2G: B3, B8

The price and lead-times for region (operator) specific versions may vary. For more information please contact us.