RUTX11

INDUSTRIAL CELLULAR ROUTER

This powerful LTE Cat 6 cellular industrial router is designed for professional applications requiring reliable, fast connection and high data throughput. It is equipped with four Gigabit Ethernet ports, AC Wi-Fi, Bluetooth LE, and comes with remote management capabilities of RMS.

End of ordering: 2023 July 30
End of production: 2023 December 30
End of support: 2028 July 30


CONNECTIVITY
4G/LTE (Cat 4), 3G, 2G

DUAL SIM
With auto failover, backup WAN and other switching scenarios

WI-FI
Wireless Access Point with Hotspot functionality

WAN FAILOVER
Automatic switch to available backup connection

FEATURES

Mobile

Mobile Module

•     4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
•     SIM switch    2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
•     Status    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation
•     SMS    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
•     USSD    Supports sending and reading Unstructured Supplementary Service Data messages
•     Black/White list    Operator black/white list
•     Multiple PDN    Possibility to use different PDNs for multiple network access and services
•     Band management    Band lock, Used band status display
•     APN    Auto APN
•     Bridge    Direct connection (bridge) between mobile ISP and device on LAN
•     Passthrough    Router assigns its mobile WAN IP address to another device on LAN

Wireless

•     Wireless mode    802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
•     WiFi security    WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
•     SSID/ESSID    ESSID stealth mode
•     WiFi users    up to 150 simultaneous connections
•     Wireless Hotspot    Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

Bluetooth

•     Bluetooth 4.0    Bluetooth low energy (LE) for short range communication

Ethernet

•     WAN    1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
•     LAN    3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Network

•     Routing    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)
•     Network protocols    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
•     VoIP passthrough support    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
•     Connection monitoring    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
•     Firewall    Port forward, traffic rules, custom rules
•     DHCP    Static and dynamic IP allocation, DHCP Relay, Relayd
•     QoS / Smart Queue Management (SQM)    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
•     DDNS    Supported >25 service providers, others can be configured manually
•     Network backup    WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
•     Load balancing    Balance Internet traffic over multiple WAN connections
•     Hotspot    Internal/external Radius server, captive portal, built in customizable landing page
•     SSHFS    Possibility to mount remote file system via SSH protocol

Security

•     Authentication    Pre-shared key, digital certificates, X.509 certificates
•     Firewall    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
•     Attack prevention    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
•     VLAN    Port and tag based VLAN separation
•     Mobile quota control    Custom data limits for both SIM cards
•     WEB filter    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
•     Access control    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

•     OpenVPN    Multiple clients and a server can run simultaneously, 12 encryption methods
•     OpenVPN Encryption    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
•     IPsec    IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
•     GRE    GRE tunnel
•     PPTP, L2TP    Client/Server instances can run simultaneously, L2TPv3 support
•     Stunnel    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
•     DMVPN    Method of building scalable IPsec VPNs
•     SSTP    SSTP client instance support
•     ZeroTier    ZeroTier VPN client support
•     WireGuard    WireGuard VPN client and server support

MODBUS TCP SLAVE

•     ID range    Respond to one ID in range [1;255] or any
•     Allow Remote Access    Allow access through WAN
•     Custom registers    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

•     Supported functions    01, 02, 03, 04, 05, 06, 15, 16
•     Supported data formats    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS DATA TO SERVER

•     Protocol    HTTP(S), MQTT, Azure MQTT

MQTT Gateway

•     MQTT Gateway    Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

•     Supported modes    TCP Master, DNP3 Outstation

Monitoring & Management

•     WEB UI    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
•     FOTA    Firmware update from server, automatic notification
•     SSH    SSH (v1, v2)
•     SMS    SMS status, SMS configuration, send/read SMS via HTTP POST/GET
•     Call    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
•     TR-069    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
•     MQTT    MQTT Broker, MQTT publisher
•     SNMP    SNMP (v1, v2, v3), SNMP Trap
•     JSON-RPC    Management API over HTTP/HTTPS
•     MODBUS    MODBUS TCP status/control
•     RMS    Teltonika Remote Management System (RMS)

IoT Platforms

•     Cloud of Things    Allows monitoring of: Device data, Mobile data, Network info, Availability
•     ThingWorx    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
•     Cumulocity    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
•     Azure IoT Hub    Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

System Characteristics

•     CPU    Quad-core ARM Cortex A7, 717 MHz
•     RAM    256 MB, DDR3
•     FLASH storage    256 MB, SPI Flash

Firmware / Configuration

•     WEB UI    Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
•     FOTA    Update FW/configuration from server
•     RMS    Update FW/configuration for multiple devices at once
•     Keep settings    Update FW without losing current configuration

Firmware Customization

•     Operating system    RutOS (OpenWrt based Linux OS)
•     Supported languages    Busybox shell, Lua, C, C++
•     Development tools    SDK package with build environment provided

Location Tracking

•     GNSS    GPS, GLONASS, BeiDou, Galileo and QZSS
•     Coordinates    GNSS coordinates via WebUI, SMS, TAVL, RMS
•     NMEA    NMEA 0183
•     NTRIP    NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
•     Server software    Supported server software TAVL, RMS
•     Geofencing    Configurable multiple geofence zones

USB

•     Data rate    USB 2.0
•     Applications    Samba share, USB-to-serial
•     External devices    Possibility to connect external HDD, flash drive, additional modem, printer
•     Storage formats    FAT, FAT32, NTFS

Input / Output

•     Input    1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
•     Output    1 x Digital Output, Open collector output, max output 30 V, 300 mA
•     Events    Email, RMS, SMS
•     I/O juggler    Allows to set certain I/O conditions to initiate event

Power

•     Connector    4-pin industrial DC power socket
•     Input voltage range    9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
•     PoE (passive)    Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
•     Power consumption    16 W Max

Physical Interfaces (Ports, LEDs, Buttons, SIM)

•     Ethernet    4 x RJ45 ports, 10/100/1000 Mbps
•     I/O’s    1 x Digital Input, 1 x Digital Output on 4-pin power connector
•     Status LEDs    4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G WiFi
•     SIM    2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
•     Power    1 x 4 pin power connector
•     Antennas    2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS
•     USB    1 x USB A port for external devices, 1 x USB A port for external devices
•     Reset    Reboot/User default reset/Factory reset button
•     Other    1 x Grounding screw

Physical Specification

•     Casing material
•     Aluminium housing with DIN tail mounting option
•     Dimensions (W x H x D)    115 x 44.2 x 95.1 mm (4.5" x 1.7" x 3.74" in)
•     Weight    456 g (1 lb)
•     Mounting options    DIN rail, flat surface placement

Operating Environment

•     Operating temperature    -40 °C to 75 °C
•     Operating humidity    10% to 90% non-condensing
•     Ingress Protection Rating    IP30

Regulatory & Type Approvals

•     Regulatory    CE/RED, RoHS, REACH
•     Vehicle    ECE R10 (E-mark)

 
EMI Immunity

•     ESD    EN 61000-4-2:2009
•     RS    EN 61000-4-3:2006 + A1:2008 + A2:2010
•     EFT    EN 61000-4-4:2012
•     Surge protection    EN 61000-4-5:2014
•     CS    EN 61000-4-6:2009
•     DIP    EN 61000-4-11:2004

RF

•     Standards    ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1

Safety

•     Standards    IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017
  
  
  

Package contains

•     Router RUTX11
•     18 W PSU
•     2 x LTE antennas (swivel, SMA male)
•     2 x WiFi antennas (swivel, RP-SMA male)
•     1 x GNSS antenna (adhesive, SMA male, 3 m cable)
•     1 x Bluetooth antenna (magnetic mount, RP-SMA male, 1.5 m cable)
•     Ethernet cable (1.5 m)
•     SIM Adapter kit
•     QSG (Quick Start Guide)
•     Packaging box

Standard order codes
Product code  |    HS Code  |    HTS Code  |    Package contains
RUTX11 000000 | 851762   | 8517.62.00 | Standard package with Euro PSU
RUTX11 100400 | 851762   | 8517.62.00 | Standard package with US PSU

For more information on all available packaging options – please contact us directly.

Available versions
Product code  |    Region   |    Frequency
RUTX11 0***** | Europe3, the Middle East, Africa, Australia, APAC2, Brazil, Malaysia
    4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B321
    4G (LTE-TDD): B38, B40, B41
    3G: B1, B3, B5, B8

RUTX11 1***** | North America
    4G (LTE-FDD): B2, B4, B5, B7, B12, B13, B25, B26, B291,B30, B66
    3G: B2, B4, B5

The price and lead-times for region (operator) specific versions may vary. For more information please contact us.